Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
532
Parameter
Permitted Values
Default
None
hotdesking.startup_register_name_enable
0 or 1
0
Description:
Enable or disable the IP phone to provide input field of register name on the logon
wizard during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter
“phone_setting.logon_wizard” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_username_enable
0 or 1
1
Description:
Enable or disable the IP phone to provide input field of user name on the logon
wizard during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter
“phone_setting.logon_wizard” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_password_enable
0 or 1
1
Description:
Enable or disable the IP phone to provide input field of password on the logon
wizard during the first startup.
0-Disabled

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm