Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
560
information, refer to Scenario A - Capturing the Current Screen of the Phone on page
562.
Procedure
Specify the trusted IP address for action URI using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the IP phone to receive
the action URI requests.
Parameter:
features.action_uri.enable
Specify the trusted IP address(es)
for sending the action URI to the
IP phone.
Parameter:
features.action_uri_limit_ip
Local
Web User Interface
Specify the trusted IP address(es)
for sending the action URI to the
IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-remotecontrl&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.action_uri.enable
0 or 1
0
Description:
Enables or disables the IP phone to receive the action URI requests.
0-Disabled
1-Enabled
Web User Interface:
None
Phone User Interface:
None
features.action_uri_limit_ip
IP address or any
Blank
Description:
Configures the IP address of the server from which the IP phone receives the action