Yealink SIP-T48G Administrator's Guide

Configuring Advanced Features
601
Parameters:
network.vlan.dhcp_enable
network.vlan.dhcp_option
Local
Web User Interface
Configure DHCP VLAN
discovery feature.
Navigate to:
http://<phoneIPAddress>/servle
t?p=network-adv&q=load
Phone User Interface
Configure DHCP VLAN
discovery feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.vlan.dhcp_enable
0 or 1
1
Description:
Enables or disables DHCP VLAN discovery feature on the IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Active
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->DHCP VLAN
network.vlan.dhcp_option
Integer from 1 to 255
132
Description:
Configures the DHCP option from which the IP phone will obtain the VLAN settings.
You can configure at most five DHCP options and separate them by commas.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm