Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
610
phone_setting.vq_rtcpxr_display_local_c
all_id.enable
phone_setting.vq_rtcpxr_display_remote
_call_id.enable
phone_setting.vq_rtcpxr_display_local_c
odec.enable
phone_setting.vq_rtcpxr_display_remote
_codec.enable
phone_setting.vq_rtcpxr_display_jitter.en
able
phone_setting.vq_rtcpxr_display_jitter_bu
ffer_max.enable
phone_setting.vq_rtcpxr_display_packets
_lost.enable
phone_setting.vq_rtcpxr_display_symm_
oneway_delay.enable
phone_setting.vq_rtcpxr_display_round_t
rip_delay.enable
phone_setting.vq_rtcpxr_display_moslq.e
nable
phone_setting.vq_rtcpxr_display_moscq.
enable
<MAC>.cfg
Configure the central report collector.
Parameters:
account.X.vq_rtcpxr.collector_name
account.X.vq_rtcpxr.collector_server_host
account.X.vq_rtcpxr.collector_server_port
Local
Web User Interface
Configure VQ-RTCPXR.
Configure the phone to display RTP status
showing the voice quality report of the
last call on the web user interface.
Configure the phone to display RTP status
showing the voice quality report of the
last call or the current call on the phone
user interface.
Configure the options of the RTP status
displayed on the phone user interface.
Navigate to:
http://<phoneIPAddress>/servlet?p=setti