Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
624
The selected list appears in the Enabled column.
3. Repeat step 2 to add more items to the Enabled column.
4. To remove an item from the Enabled column, select the desired item and then
click .
5. To adjust the display order of enabled items, select the desired item and then click
or .
The LCD screen will display the item(s) in the adjusted order.
6. Click Confirm to accept the change.
To configure the central report collector via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the host name of the central report collector in the VQ RTCP-XR Collector
name field.
4. Enter the IP address of the central report collector in the VQ RTCP-XR Collector
address field.