Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
628
Parameters
Permitted Values
Default
Web User Interface:
Network->Advanced->SIP QoS (0~63)
Phone User Interface:
None
To configure DSCPs for voice packets and SIP packets via web user interface:
1. Click on Network->Advanced.
2. Enter the desired value in the Voice QoS (0~63) field.
3. Enter the desired value in the SIP QoS (0~63) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm