Yealink SIP-T48G

Configuring Advanced Features
649
DHCPv6
SLAAC
(ICMPv6)
How the IP phone obtains the IPv6 address and network
settings?
Disabled
Enabled
The IP phone can obtain the IPv6 address via SLAAC, but
the other network settings must be configured manually.
Enabled
Disabled
The IP phone can obtain the IPv6 address and the other
network settings via DHCPv6.
Enabled
Enabled
The IP phone can obtain the IPv6 address via SLAAC and
obtain other network settings via DHCPv6.
Procedure
IPv6 can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the IPv6 address
assignment method.
Parameters:
network.ip_address_mode
network.ipv6_internet_port.type
network.ipv6_internet_port.ip
network.ipv6_prefix
network.ipv6_internet_port.gateway
network.ipv6_icmp_v6.enable
Configure the IPv6 static DNS
address.
Parameters:
network.ipv6_primary_dns
network.ipv6_secondary_dns
<y0000000000xx>.c
fg
Configure the IPv6 static DNS.
Parameter:
network.ipv6_static_dns_enable
Local
Web User Interface
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Phone User
Interface
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.