Yealink SIP-T48G

Configuring Audio Features
661
Parameters
Permitted Values
Default
Example:
To configure a phone built-in ring tone (e.g., Ring1.wav): phone_setting.ring_type =
Ring1.wav
To configure a custom ring tone (e.g., Customring.wav): phone_setting.ring_type =
Customring.wav
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav,
Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Web User Interface:
Settings->Preference->Ring Type
Phone User Interface:
Menu->Settings->Basic Settings->Sound->Ring Tones->Common
account.X.ringtone.ring_type
Refer to the following
content
Common
Description:
Configures a ring tone for account X.
Example:
account.1.ringtone.ring_type = Ring3.wav
It means configuring Ring3.wav for account1.
account.1.ringtone.ring_type = Common
It means account1 will use the ring tone selected for the IP phone configured by the
parameter "phone_setting.ring_type".
Permitted Values:
Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav,
Ring7.wav, Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (e.g.,
Customring.wav).
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Basic->Ring Type
Phone User Interface: