Yealink SIP-T48G

Configuring Audio Features
667
Alert-Info: <http://10.1.0.31>;info=ringtone-2
Alert-Info: <http://127.0.0.1/ringtone-2>
Alert-Info: MyMelody2
Alert-Info: MyMelody2;x-line-id=1
Alert-Info: <http://10.1.0.31>;x-line-id=0;info=MyMelody2
The following table identifies the corresponding local ring tone:
Value of N
Ring Tone
1
Ring1.wav
2
Ring2.wav
3
Ring3.wav
4
Ring4.wav
5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
9
Silent.wav
10
Splash.wav
N<1 or N>10
Ring1.wav
3) Alert-Info: <URL>
When the Alert-Info header contains a remote URL, the IP phone will try to download the
WAV ring tone file from the URL and then play the remote ring tone if the value of the
parameter “account.X.alert_info_url_enable” is set to 1 (or the item called “Distinctive
Ring Tones” on the web user interface is Enabled), or play the preconfigured local ring
tone in about 10 seconds if the value of the parameter “account.X.alert_info_url_enable”
is set to 0 or if the IP phone fails to download the remote ring tone.
Example:
Alert-Info: http://192.168.0.12:8080/Custom.wav
4) Alert-Info: info=info text;x-line-id=0
When the Alert-Info header contains an info text, the IP phone will map the text with the
Internal Ringer Text preconfigured (or the value of the parameter
“distinctive_ring_tones.alert_info.X.text” is configured) on the IP phone, and then play