Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
688
http://<phoneIPAddress>/servlet?
p=account-adv&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
account.X.codec.Y.enable
(X ranges from 1 to 16, Y ranges from 1 to 11)
0 or 1
Refer to the
following content
Description:
Enables or disables the specified codec for account X.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Default:
For SIP-T48G/T46G/T42G/T41P/T29G/CP860:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 1;
When Y=6, the default value is 1;
When Y=7, the default value is 0;
When Y=8, the default value is 0;
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0;
For SIP-T40P/T27P/T23P/T23G/T21(P) E2/T19(P) E2:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 1;
When Y=4, the default value is 1;
When Y=5, the default value is 0;