Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
704
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
security.user_password
String within 32 characters
user
Description:
Configures the password of the user for phone’s web user interface access.
The IP phone uses “user” as the default user password.
The valid value format is username:new password.
Example:
security.user_password = user:123 means setting the password of user (current user
name is “user”) to password 123.
Note: IP phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can
set the password to be empty via web user interface only.
Web User Interface:
Security->Password
Phone User Interface:
None
To change the user password via web user interface:
1. Click on Security->Password.
2. Select user from the pull-down list of User Type.
3. Enter new password in the New Password and Confirm Password fields.
Valid characters are ASCII characters 32-126(0x20-0x7E) except 58(3A).
4. Click Confirm to accept the change.
Note
If logging into the web user interface of the phone with the user credential, you need to
enter the old user password in the Old Password field.