Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
738
For more information on 802.1X authentication, refer to Yealink 802.1X Authentication .
Procedure
802.1X authentication can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the 802.1X
authentication.
Parameters:
network.802_1x.mode
network.802_1x.identity
network.802_1x.md5_password
network.802_1x.root_cert_url
network.802_1x.client_cert_url
Local
Web User Interface
Configure the 802.1X
authentication.
Navigate to:
http://<phoneIPAddress>/servle
t?p=network-adv&q=load
Phone User Interface
Configure the 802.1X
authentication.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.802_1x.mode
0, 1, 2, 3, 4, 5, 6 or 7
0
Description:
Configures the 802.1x authentication method.
0-Disabled
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
7-EAP-FAST
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.