Troubleshooting
751
Details of Configuration Parameters:
Description:
Configures the detail level of syslog information to be exported.
0-system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->System Log Level
Phone User Interface:
None
To configure the level of the system log via web user interface:
1. Click on Settings->Configuration.
2. Select the desired level from the pull-down list of System Log Level.
3. Click Confirm to accept the change.
To Next Page
Loading...
