Yealink SIP-T48G Administrator's Guide

Troubleshooting
755
Details of Configuration Parameters:
Parameters
Permitted Values
Default
syslog.mode
0, 1 or 2
0
Description:
Configures the IP phone to export log files to the local system, syslog server or an
FTP/TFTP Server (provisioning server).
0-Local
1-Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None
syslog.server
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
syslog.server = 192.168.1.100
Note: It works only if the value of the parameter “syslog.mode” is set to 1 (Server).
If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
To configure the phone to export the system log to a syslog server via web user
interface:
1. Click on Settings->Configuration.
2. Mark the Server radio box in the Export System Log field.
3. Enter the IP address or domain name of the syslog server in the Server Name field.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm