Yealink SIP-T48G

Troubleshooting
767
Procedure
Watch Dog can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure Watch Dog
feature.
Parameter:
watch_dog.enable
Local
Web User Interface
Configure Watch Dog
feature.
Navigate to:
http://<phoneIPAddress>
/servlet?p=settings-prefer
ence&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
watch_dog.enable
0 or 1
1
Description:
Enables or disables the Watch Dog feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will reboot automatically when the system is
broken down.
Web User Interface:
Settings->Preference->WatchDog
Phone User Interface:
None
To configure watch dog feature via web user interface:
1. Click on Settings->Preference.