Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
784
Source
Device
Source IP
Source Port
Destination
Device
Destination IP
Destination Port
(Listening port)
Protocol
Description of destination port
1024~65535
SNMP Server
IP address of
SNMP server
Determined by
destination
device.
UDP
SNMP protocol port, it is used
to communicate with SNMP
server.
68
DHCP Server
IP address of
DHCP server
67
UDP
DHCP protocol port, it is used
to obtain IP address from
DHCP server.
1024~65535
LDAP Server
IP address of
LDAP server
Determined by
destination
device.
TCP
LDAP protocol port, it is used
to obtain the contact
information from LDAP server.
1024~65535
NTP Server
IP address of
NTP server
123
UDP
NTP protocol port, it is used to
synchronize time from NTP
time server.
1024~65535
Syslog Server
IP address of
syslog server
514
UDP
Syslog protocol port, it is used
for IP phones to upload
syslog information to syslog
server.
1024~65535
PNP Server
IP address of
PNP server
(Default value:
224.0.1.75)
5059
UDP/TCP
Protocol port, it is used to
obtain the URL of updating file
from PNP server.
Multipaging
Multipaging
65000
65001
PC
IP
1~65535
TCP
HTTP port (default value: 80)

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm