Yealink SIP-T48G - Page 93

Getting Started
73
Parameters
Permitted Values
Default
The default value is SIP-T27P.
For SIP-T23P IP phones:
The default value is SIP-T23P.
For SIP-T23G IP phones:
The default value is SIP-T23G.
For SIP-T21(P) E2 IP phones:
The default value is SIP-T21P_E2.
For SIP-T19(P) E2 IP phones:
The default value is SIP-T19P_E2.
For CP860 IP phones:
The default value is CP860.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Features->General Information->DHCP Hostname
Phone User Interface:
None
To configure DHCP option 12 hostname on the IP phone via web user interface:
1. Click on Feature->General Information.
2. Enter the desired host name in the DHCP Hostname filed.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.