YOKOGAWA AQ6370D - Page 116

5-47
IM AQ6370D-01EN
Measurement
1
2
3
4
5
6
7
8
9
10
11
App
Index
When SMPL ENABLE Is Selected
The minimum necessary pulse width of the external trigger input signal varies according
to the sensitivity setting.
If the time that the external trigger input signal level is low is less than this pulse width,
the instrument cannot perform the sweep.
Sensitivity Name and Minimum Pulse Width
Sensitivity Setting Minimum Pulse Width
NORM/HOLD 50 ms
NORM/AUTO 50 ms
NORMAL 50 ms
MID 50 ms
HIGH1 70 ms
HIGH2 100 ms
HIGH3 300 ms
5.16 External Trigger Measurement