YOKOGAWA AQ6370D User Manual

7-40
IM AQ6370D-01EN
Sweep width setting
Sweep time setting
Note
• When the sweep range is set to 0 nm, the horizontal axis is set as the time axis as a result.
• The sweeping time varies depending on the measurement sensitivity (SENS/MODE soft key
under SETUP). If the setting for this key is less than the sweeping time for each sensitivity,
the setting for the key is invalid and the MINIMUM setting is used.
7.11 Measurement of Level Fluctuations in Single-Wavelength Light (0 nm Sweeping)

YOKOGAWA AQ6370D Specifications

General

Brand	YOKOGAWA
Model	AQ6370D
Category	Measuring Instruments
Language	English