8-32
IM AQ6370D-01EN
Explanation
You can save instrument setting data to internal memory or a USB storage medium, or
load previously saved setting data and modify the settings.
Extension
The extension used when loading is .ST8.
File Name
You can have a file name automatically assigned, or specify an arbitrary name for
the save. If you do not specify a file name, the following file name will be assigned
automatically according to the AUTO FILE NAME setting.
When AUTO FILE NAME is set to NUM
File name: WXXXX.ST8
XXXX is a serial number from 0000 to 9999
When AUTO FILE NAME is set to DATE
File name: Wyyyymmdd_hhmmss.ST8
yyyymmdd: Year (Gregorian) month day
hhmmss: Hour (24 hours) minute second
(Date/time when the file list was updated)
Note
• The date/time used when file names are assigned based on the date through remote
commands or program commands is the date/time when the file is created.
• Only use the characters allowed in file names by MS-DOS when changing a file name.
The maximum file name length is 56 characters (including the extension). The following
characters can be used in file names.
!#$%&’()-
0123456789@
ABCDEFGHIJKLMNOPQRSTUVWXYZ^
abcdefghijklmnopqrstuvwxyz{}¯
File Size
The file size is approximately 74 KB.
File Sort
You can sort the file list in ascending order by file name, file type, file date, or label.
8.5 Saving/Loading Setting Data
To Next Page
Loading...
