8-37
IM AQ6370D-01EN
Saving/Loading Data
8
Executing the Load
7.
Press the EXECUTE soft key. The file is loaded.
When the RETURN soft key is pressed, the file is not loaded. The screen returns
to the previous stage.
Explanation
Extensions
The extensions used when saving are as follows.
DAT (ASCII format): .DT8
CSV (ASCII format): .CSV
File Name
You can save files by assigning their names automatically or with specific names.
If you do not specify a file name, the following file name will be assigned automatically
according to the AUTO FILE NAME setting.
When AUTO FILE NAME is set to NUM
File name: WXXXX.CSV (or .DT8)
XXXX is a serial number from 0000 to 9999
When AUTO FILE NAME is set to DATE
File name: Wyyyymmdd_hhmmss.CSV (or .DT8)
yyyymmdd: Year (Gregorian) month day
hhmmss: Hour (24 hours) minute second
(Date/time when the file list was updated)
Note
• The date/time used when file names are assigned based on the date through remote
commands or program commands is the date/time when the file is created.
• Only use the characters allowed in file names by MS-DOS when changing a file name.
The maximum file name length is 56 characters (including the extension). The following
characters can be used in file names.
!#$%&’()-
0123456789@
ABCDEFGHIJKLMNOPQRSTUVWXYZ^
abcdefghijklmnopqrstuvwxyz{}¯
8.6 Saving/Loading Analysis Results Data
To Next Page
Loading...
Need help?
General
