8-60
IM AQ6370D-01EN
Loading the File
8.
Press the EXECUTE soft key. The file is loaded.
If you press the RETURN soft key, the file will not be loaded. The menu returns to
the previous level.
Select a file.
Explanation
You can save logging data to the internal memory or USB storage media and also load
logging data saved previously.
Extension
The file name extensions of logging data are shown below.
LG8 (binary format): .LG8
CSV (ASCII format): .CSV
Logging data saved to CSV format cannot be loaded into the AQ6370D.
If waveform data is also saved (TRACE LOGGING is set to ON), waveform data will be
included in the LG8 file, and thus the file size will be large.
File Name
You can save files by assigning their names automatically or with specific names.
If you do not specify a file name, the following file name will be assigned automatically
according to the AUTO FILE NAME setting.
When AUTO FILE NAME is set to NUM
File name: WXXXX.CSV (or .LG8)
XXXX is a serial number from 0000 to 9999
When AUTO FILE NAME is set to DATE
File name: Wyyyymmdd_hhmmss.CSV (or .LG8)
yyyymmdd: Year (Gregorian) month day
hhmmss: Hour (24 hours) minute second
(Date/time when the file list was updated)
Note
• The date/time used when file names are assigned based on the date through remote
commands or program commands is the date/time when the file is created.
• Only use the characters allowed in file names by MS-DOS when changing a file name.
The maximum file name length is 56 characters (including the extension). The following
characters can be used in file names.
!#$%&’()-
0123456789@
ABCDEFGHIJKLMNOPQRSTUVWXYZ^
abcdefghijklmnopqrstuvwxyz{}¯
8.10 Saving and Loading Logging Data
To Next Page
Loading...
