App-34
IM AQ6370D-01EN
List of Parameters
Item Parameter Default Setting Range Unit Description
PEAK LEVEL SW ON ON or OFF - ON/OFF switchover of display.
PEAL WL SW ON ON or OFF - ON/OFF switchover of display.
CENTER WL
SW ON ON or OFF - ON/OFF switchover of display
ALGO THRESH
THRESH
RMS
-
Selection of algorithm for spectrum
width.
THRESH LVL
THRESH: 3.00
RMS: 3.00
0.1 to 50.0 dB
Threshold value for channel detection.
Valid only when ALGO is THRESH.
K
THRESH: 1.00
RMS: -
1.00 to 10.00 -
Multiplying factor.
Valid only when ALGO is THRESH.
MODE FIT
THRESH: OFF
RMS: -
ON or OFF -
Whether “half of maximum point” is set
to the mode peak or not.
Valid only when ALGO is THRESH.
MODE DIFF
THRESH: 3.00
RMS: -
0.0 to 50.0 dB
Minimum value of the peak/bottom
difference during channel detection.
Valid only when ALGO is THRESH.
SPECTRUM
WIDTH
SW ON ON or OFF - ON/OFF switchover of display.
ALGO THRESH
THRESH
RMS
-
Selection of algorithm for spectrum
width.
THRESH LVL
THRESH: 3.00
RMS: 3.00
0.1 to 50.0 dB Threshold for channel detection.
K
THRESH: 1.00
RMS: -
1.00 to 10.00 -
Multiplying factor.
Valid only when ALGO is THRESH.
MODE FIT
THRESH: OFF
RMS: -
ON or OFF -
Whether “half of maximum point” is set
to the mode peak or not.
Valid only when ALGO is THRESH.
SPECTRUM
WIDTH
MODE DIFF
THRESH: 3.00
RMS: -
0.0 to 50.0 dB
Minimum value of the peak/bottom
difference during channel detection.
Valid only when ALGO is THRESH.
RIPPLE
WIDTH
SW ON ON or OFF - ON/OFF switchover of display.
THRESH LVL 3 0.1 to 50.0 dB Threshold value for channel detection.
MODE DIFF 0.5 0.000 to 50.000 dB
Minimum value of the peak/bottom
difference during channel detection.
CROSS TALK
SW ON ON or OFF - ON/OFF switchover of display.
ALGO THRESH
THRESH
PK LVL
GRID
-
Selection of algorithm for spectrum
width.
THRESH LVL
THRESH: 3.00
PK LVL: -
GRID: -
0.1 to 50.0 dB
Threshold value for channel detection.
Valid only when ALGO is THRESH.
K
THRESH: 1.00
PK LVL: -
GRID: -
1.00 to 10.00 -
Multiplying factor.
Valid only when ALGO is THRESH.
MODE FIT
THRESH: OFF
PK LVL: -
GRID: -
ON or OFF -
Whether “half of maximum point” is set
to the mode peak or not.
Valid only when ALGO is THRESH.
MODE DIFF
THRESH: 3.00
PK LVL: -
GRID: -
0.0 to 50.0 -
Minimum value of the peak/bottom
difference during channel detection.
Valid only when ALGO is THRESH.
CH SPACE 0.4 0.00 to 50.00 nm Setting of channel spacing
SEARCH
AREA
0.01 0.01 to 10.00 nm
Setting of the analysis range.
Valid only when ALGO is GRID.
Appendix 6 Details of Optical Filter Analysis Function
To Next Page
Loading...
