CHAPTER 7 123SCAN AND SOFTWARE
TOOLS
Introduction
This chapter briefly describes the Zebra software tools available for customizing scanner operation.
123Scan
123Scan is a software tool that simplifies scanner setup and more.
Intuitive enough for first time users, the 123Scan wizard guides users through a streamlined setup process.
Settings are saved in a configuration file that can be printed as a single programming bar code for scanning,
emailed to a smart phone for scanning from its screen, or downloaded to the scanner using a USB cable.
Through 123Scan a user can:
•
Configure a scanner using a wizard
• Program the following scanner settings:
• Beeper tone / volume settings
• Enable / disable symbologies
• Communication settings
• Modify data before transmission to a host using:
• Advanced Data Formatting (ADF) - Scan one bar code per trigger pull
•
Load parameter settings to a scanner via bar code scanning:
• Scan a paper bar code
• Scan a bar code from a PC screen
• Scan a bar code from a smart phone screen
NOTE The CS4070 can not communicate directly with 123Scan² via a USB cable.
The CS4070 can only support up to 50 modified parameters in any one 123Scan configuration file when
configuring the scanner using a Data Matrix bar code.
To Next Page
Loading...
Need help?
General
