Zebra CS4070 User Manual

3 - 6 CS4070 Scanner Product Reference Guide
Set Date and Time
Set Date
Scan the Set Date bar code, then scan six numeric digits in the format mmddyy from Numeric Bar Codes for
Date and Time Settings on page 3-7
(first two for the month, second two for the day, third two for the year).
Set Date
Set Time
Scan the Set Time bar code, then scan four numeric digits in the format hhmm from Numeric Bar Codes for
Date and Time Settings on page 3-7 representing the time according to the 24 hour clock (first two for the hour,
second two for the minute).
For example, to set the time to 8:45 in the morning, scan the following bar code, then scan 0, 8, 4, 5. To set the
time to 3:07 in the afternoon, scan 1, 5, 0, 7.
Set Time
Cancel Date and Time Setting
Scan the Cancel Set Date/Time bar code to cancel the date and time settings.
Cancel Set Date/Time
NOTE You must scan the configuration bar codes to set the time and date stamp on the scanner. The time and
date can not be set or edited in the config.ini file. This setting persists for three months if the scanner is
not used.
NOTE To change the date format from mmddyy, see DateFormat on page 1-10.
NOTE To change the time format between 12h and 24h, see TimeFormat on page 1-12.

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English