Scanning 2 - 7
Beeper Indications
Table 2-2
Beeper Indications
Function Performed Beeper Feedback Other
Successful bar code scan Short high beep Imager off
Successful bar code deletion Short medium beep Imager off
Unsuccessful deletion - item doesn't
exist (when in batch mode)
Long short short beep Imager off
Successful clear all Warble (high low high low)
beep
Imager off
Successful data protection setting Short long short beep
Connect scanner to a host PC USB
port to charge scanner
Low high beep
Enable Bluetooth radio Short beep Hold Bluetooth button
Bluetooth radio pairing Short low high beep
Bluetooth radio out of range of host Short high low beep Stops transmitting beacons
Bluetooth radio returns to
communication range of host
Short low high beep Re-pairs device with host
Bluetooth automatic reconnect to
host or disconnect from host
2 short beeps
Auto-reconnect on page 3-12
must
be enabled
Attempt to scan when out of
Bluetooth radio range
4 high beeps No Bluetooth transmission
Memory Full Scan Long beep for 5 seconds or
until scan button released
To Next Page
Loading...
Need help?
General
