Zebra CS4070 User Manual

C - 2 CS4070 Scanner Product Reference Guide
iPad Pairing Example
1. Press the scan button (+) to wake the scanner.
2. Scan the Bluetooth HID Profile bar code on page 3-10.
3. Press and hold the Bluetooth button for five seconds. The scanner beeps and the Bluetooth button blinks
quickly to indicate that the scanner is discoverable by the host.
4. On the iPad, tap the Settings icon.
5. Tap General from the list of options that appears.
6. Tap Bluetooth. If Bluetooth is not enabled, swipe to enable it. The CS4070 appears in the Devices list,
indicated by its model name.
Figure C-1 Bluetooth Devices
7. Select the CS4070 from the list. In HID mode, the CS4070 doesn't have to scan a PIN code to authenticate
pairing.
The scanner beeps to indicate it has paired with the iPad, and the iPad displays Connected next to the
CS4070 device name.
Figure C-2 CS4070 Connected

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English