Zebra CS4070 User Manual

7 - 2 CS4070 Scanner Product Reference Guide
• Validate scanner setup:
• View scanned data within the utility's Data View screen
• Capture an image and save to a PC within the utility's Data View screen
• Review settings using the Parameter Report
• Clone settings from an already deployed scanner
• Upgrade scanner firmware:
• Load settings to one scanner
• Stage up to 10 scanners simultaneously with a power USB hub
• View statistics such as:
• Asset tracking information
• Time and usage information
• Bar codes scanned by symbology
• Battery diagnostics
• Communication diagnostics
• Generate the following reports:
• Barcode Report - Programming bar code, included parameter settings, and supported scanner
models
• Parameter Report - Lists parameters programmed within a configuration file
• Activity Report - Lists activities performed on a scanner(s)
• Inventory Report - Lists scanner asset tracking information
• Validation Report - Printout of scanned data
• Statistics Report - Lists all statistics retrieved from the scanner
For more information go to: http://www.zebra.com/123Scan.
123Scan Information
For more information on123Scan, go to: http://www.zebra.com/123Scan
For a 1 minute tour of 123Scan, go to: http://www.zebra.com/ScannerHowToVideos
To download any of the following free tools, go to: http://www.zebra.com/scannersoftware
• 123Scan configuration utility (described in this chapter)
• How-to-videos
NOTE You can not use 123Scan² to update CS4070 firmware. For instructions on updating firmware, see
Updating Scanner Firmware on page 1-8.

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English