7 - 4 CS4070 Scanner Product Reference Guide
Scanner Control App
The Scanner Control App allows you to control a Bluetooth scanner from a phone or tablet without a cradle.
Use this app to showcase a Zebra Bluetooth scanner's capabilities and ease of control right from your phone.
The Scanner Control App supports Scan-To-Connect technology for one-step Bluetooth pairing, and allows
you to control the following scanner functions:
•
Program the beeper and LEDs
•
Enable and disable symbologies
•
Remotely trigger a scan
The app displays scanned bar code data, and can query scanner asset information and battery health
statistics.
The Scanner Control app is available on the Android Play, iOS App, and Zebra AppGallery stores. Source
code is available within the Zebra Scanner SDK for Android and iOS.
Advanced Data Formatting (ADF)
Advanced Data Formatting (ADF) is a means of customizing data from before transmission to the host device.
Use ADF to edit scan data to suit your host's requirements. With ADF you scan one bar code per trigger pull.
ADF is programmed using 123Scan.
The scanner stores ADF rules in persistent memory and retains them through a battery replacement.
The CS4070 supports all ADF rules except LED rules, beeper rules, pause duration.
CS4070 ADF programming supports all non-printable keystrokes and non-ASCII characters defined in the
tables shown in Appendix H, ASCII Character Sets.
For an ADF tutorial and a 123Scan programming example, go to the 123Scan section of our How To Videos:
http://www.zebra.com/ScannerHowToVideos
For additional information, refer to the Advanced Data Formatting Programmer Guide.
To Next Page
Loading...