Zebra CS4070 User Manual

User Preferences 3 - 25
HID Keyboard FN1 Substitution
Parameter # 1375
SSI # F8h 05h 5Fh
When enabled, this parameter allows replacement of any FN1 character in an EAN128 bar code with a key
category and value chosen by the user. See FN1 Substitution Values to set the key category and key value.
FN1 Substitution Values
Key Category Parameter # 103
SSI # 67h
Decimal Value Parameter # 109
SSI # 6Dh
Enabling HID Keyboard FN1 Substitution substitutes any FN1 character (0x1d) in an EAN128 bar code with a
value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set
the 3-digit keystroke value. See Table H-1 on page H-1 for the desired value.
To select a FN1 substitution value via bar code menus:
1. Scan the bar code below.
2. Locate the keystroke desired for FN1 Substitution in Table H-1 on page H-1. Enter the 4-digit ASCII value
by scanning each digit in Appendix F, Numeric Bar Codes.
To correct an error or change the selection, scan Cancel.
*Disable Keyboard FN1 Substitution
(0)
Enable Keyboard FN1 Substitution
(1)
Set FN1 Substitution Value

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English