3 - 34 CS4070 Scanner Product Reference Guide
Low Light Scene Detection
Parameter # 810
SSI # F2h 2Ah
This parameter allows the scanner to detect motion in dim to dark illumination environments when in
presentation mode.
•
No Low Light Scene Detection: The scanner attempts to detect motion as best it can with the aim dot
and illumination turned off when the scanner is idle.
•
Aiming Dot Low Light Assist Scene Detection: Illumination is turned off, but the aim dot is turned on
when the scanner is idle to assist in scene detection.
•
Dim Illumination Low Light Assist Scene Detection: The aim dot is turned off, but illumination is
turned on at a dim level to assist in scene detection.
NOTE If both Low Light Scene Detection and Decoding Illumination are enabled, Decoding Illumination takes
precedence.
*No Low Light Assist Scene Detection
(0)
Aiming Dot Low Light Assist Scene Detection
(1)
Dim Illumination Low Light Assist Scene Detection
(2)
To Next Page
Loading...
Need help?
General
