Zebra CS4070 User Manual

2 - 6 CS4070 Scanner Product Reference Guide
Data Protection Indications
Toggle data protection on or off
(when enabled)
Press & hold both
scan (+) and
delete (-) buttons
for 6 seconds.
None
Successful data protection setting Solid amber
Bluetooth Indications
Enable Bluetooth radio Hold Bluetooth
button.
Rapidly flashing blue
LED
Bluetooth is enabled but has
not paired with a host.
Bluetooth radio pairing Press Bluetooth
button.
Slowly flashing blue
LED
Bluetooth radio paired with host
and in range
Very slowly flashing
blue LED
Unpair scanner from host Hold Bluetooth
button for 2
seconds.
Off
Bluetooth radio out of range of
host
Blue LED rapidly
flashes for 2
minutes, then turns
off
Stops transmitting beacons.
Bluetooth radio returns to
communication range of host
Press any button. Very slowly flashing
blue LED
Re-pairs device with host.
Special Conditions
Memory low scan Press & hold scan
(+) button.
Flashing red, then
normal operation
Delete/Clear All Press & hold
delete (-) button.
Normal operation
Memory Full Scan Press & hold scan
(+) button.
Solid red
Memory Full Delete/Clear All Press & hold
delete (-) button.
Normal operation
Data protection (enabled and on) Scan/function/
host com
Rapidly flashing red
Unexpected failure Scan/function/dock Flashing red, green
and amber for 5
seconds
Contact support
Battery depleted Scan/function/dock None
Table 2-1 LED Indications (Continued)
Function Performed User Action LED Feedback Other

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English