Zebra CS4070 User Manual

Standard Default Parameters A - 7
Codabar (NW - 7)
Codabar 7 07h Enable 5-51
Set Lengths for Codabar 24, 25 18h, 19h 4 to 55 5-51
CLSI Editing 54 36h Disable 5-53
NOTIS Editing 55 37h Disable 5-53
Codabar Upper or Lower Case
Start/Stop Characters Detection
855 F2h 57h Upper Case 5-54
MSI
MSI 11 0Bh Disable 5-55
Set Length(s) for MSI 30, 31 1Eh, 1Fh 4 to 55 5-55
MSI Check Digits 50 32h One 5-57
Transmit MSI Check Digit 46 2Eh Disable 5-57
MSI Check Digit Algorithm 51 33h Mod 10/Mod 10 5-58
Chinese 2 of 5
Chinese 2 of 5 408 F0h 98h Disable 5-59
Matrix 2 of 5
Matrix 2 of 5 618 F1h 6Ah Disable 5-60
Matrix 2 of 5 Lengths 619, 620 F1h 6Bh
F1h 6Ch
4 to 55 5-60
Matrix 2 of 5 Check Digit 622 F1h 6Eh Disable 5-62
Transmit Matrix 2 of 5 Check Digit 623 F1h 6Fh Disable 5-62
Korean 3 of 5
Korean 3 of 5 581 F1h 45h Disable 5-63
Inverse 1D 586 F1h 4Ah Regular 5-64
GS1 DataBar
GS1 DataBar-14 338 F0h 52h Enable 5-65
GS1 DataBar Limited 339 F0h 53h Enable 5-65
GS1 DataBar Expanded 340 F0h 54h Enable 5-66
Convert GS1 DataBar to UPC/EAN 397 F0h 8Dh Disable 5-66
GS1 DataBar Limited Security Level 728 F1h D8h Level 3 5-67
Table A-1 Default Table (Continued)
Parameter
Parameter
Number
SSI Number Factory Default
Page
Number

Zebra CS4070 Specifications

General

Brand	Zebra
Model	CS4070
Category	Barcode Reader
Language	English