5 - 40 DS2278 Digital Scanner Product Reference Guide
Save Bluetooth Connection Information
Parameter # 1743
SSI # F8h 06h CFh
Scan a barcode below to enable or disable the digital scanner’s ability to save Bluetooth connection information.
•
Enable Bluetooth Connection Information: The digital scanner saves the last connection and attempts to
reconnect after a battery swap (power cycle) if it is set to auto-reconnect. See the Auto-Reconnect Feature
on page 5-22 for more information.
•
Disable Bluetooth Connection Information: The digital scanner does not save the last connection to
permanent memory and does NOT reconnect after a battery swap (power cycle). Note that depending on
auto-reconnect settings the digital scanner still reconnect son going out of range and other conditions where
connection is lost but auto-reconnect is desired.
*Enable Bluetooth Connection Information
Disable Bluetooth Connection Information
To Next Page
Loading...