12 - 80 DS2278 Digital Scanner Product Reference Guide
Composite Inverse
Parameter # 1113
SSI # F8h 04h 59h
This parameter sets Composite for either regular decode or inverse decode. This mode only supports Inverse
Composite that has DataBar combined with CCAB. No other 1D/2D combinations.
• Regular Only: The digital scanner decodes regular Composite bar codes only. (default).
•Inverse Only: The digital scanner decodes inverse Composite bar codes only. For this parameter to work as
expected, Composite CC-A/B on page 12-79 and corresponding 1D Inverse or 1D Inverse Autodetect (page
12-69) must be enabled.
NOTE To decode regular Composite, Composite Inverse must be set to Regular Only and Inverse 1D must be
set to Regular Only or Autodetect.
To decode inverse Composite, Composite Inverse must be set to Inverse Only and Inverse 1D must be
set to Inverse Only or Autodetect.
* Regular Only
(0)
Inverse Only
(1)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
