Zebra DS2278

User Preferences & Miscellaneous Options 4 - 19
Hands-Free (Presentation) Decode Aiming Pattern
Parameter # 590
SSI # F1h 4Eh
Scan one of the following bar codes to select when to project the aiming pattern in hands-free mode:
• Enable Hands-Free
(Presentation) Decode Aiming Pattern - This projects the aiming pattern during bar
code capture.
• Disable Hands-Free
(Presentation) Decode Aiming Pattern - This turns the aiming pattern off.
• Enable Hands-Free
(Presentation) Decode Aiming Pattern on PDF - This projects the aiming pattern when
the scanner detects a PDF bar code.
NOTE With Picklist Mode on page 4-20 enabled, the decode aiming pattern flashes even when you disable the
Hands-Free Decode Aiming Pattern.
Enable Hands-Free (Presentation)
Decode Aiming Pattern
(1)
Disable Hands-Free (Presentation)
Decode Aiming Pattern
(0)
*Enable Hands-Free (Presentation)
Decode Aiming Pattern on PDF
(2)