Symbologies 12 - 77
1D Quiet Zone Level
Parameter # 1288
SSI # F8h 05h 08h
This feature sets the level of aggressiveness when decoding bar codes with a reduced quiet zone (the margin on
either side of a bar code), and applies to symbologies enabled by a Reduced Quiet Zone parameter. Because
higher levels increase the decoding time and risk of misdecodes, Zebra strongly recommends enabling only the
symbologies which require higher quiet zone levels, and leaving Reduced Quiet Zone disabled for all other
symbologies. Options are:
• 1D Quiet Zone Level 0 - The scanner performs normally in terms of quiet zone.
• 1D Quiet Zone Level 1 - The scanner performs more aggressively in terms of quiet zone.
• 1D Quiet Zone Level 2 - The scanner only requires a quiet zone at the end of bar code for decoding.
• 1D Quiet Zone Level 3 - The scanner decodes anything in terms of quiet zone or end of bar code.
1D Quiet Zone Level 0
(0)
*1D Quiet Zone Level 1
(1)
1D Quiet Zone Level 2
(2)
1D Quiet Zone Level 3
(3)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
