USB Interface 7 - 9
Bar Codes with Unknown Characters
This option applies only to the
USB Keyboard HID
and IBM devices. Unknown characters are characters the host
does not recognize. Scan Send Bar Codes With Unknown Characters to send all bar code data except for
unknown characters. The scanner issues no error beeps.
Scan Do Not Send Bar Codes With Unknown Characters for IBM devices to prevent sending bar codes
containing at least one unknown character to the host, or for
USB Keyboard HID
devices to send the bar code
characters up to the unknown character. The scanner issues an error beep.
USB Convert Unknown to Code 39
This option applies only to the IBM Hand-Held, IBM Table-Top, and OPOS devices. Scan one of the following bar
codes to enable or disable converting unknown bar code type data to Code 39.
USB Fast HID
Scan Enable USB Fast HID to transmit
USB HID
data at a faster rate.
*Send Bar Codes with Unknown Characters
Do Not Send Bar Codes with Unknown Characters
Enable Convert Unknown to Code 39
*Disable Convert Unknown to Code 39
NOTE Disable this if there are problems with transmission.