Zebra DS2278

Symbologies 12 - 69
Inverse 1D
Parameter # 586
SSI # F1h 4Ah
Scan one of the following bar codes to set the 1D inverse decoder setting:
•
Regular Only - The scanner decodes regular 1D bar codes only.
•
Inverse Only - The scanner decodes inverse 1D bar codes only.
•
Inverse Autodetect - The scanner decodes both regular and inverse 1D bar codes.
NOTE This parameter does not apply to GS1 DataBar code types.
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)