User Preferences & Miscellaneous Options 4 - 17
Hands-Free Mode
Parameter # 630
SSI # F1h 76h
Scan one of the following bar codes to enable or disable
hands-free
mode:
• Enable Hands-Free Mode - When you place the scanner in a stand, it automatically triggers when
presented with a bar code. Lifting the scanner or pulling the trigger causes it to behave according to the
setting of the Trigger Mode on page 4-16.
• Disable Hands-Free Mode - The scanner behaves according to the setting of the Trigger Mode on page
4-16 regardless of whether it is hand-held or in stand.
*Enable Hands-Free Mode
(1)
Disable Hands-Free Mode
(0)