Zebra DS2278 Reference Guide

7 - 4 DS2278 Digital Scanner Product Reference Guide
USB Polling Interval 3 msec 7-11
Keypad Emulation Enable 7-13
Quick Keypad Emulation Enable 7-13
Keypad Emulation with Leading Zero Enable 7-14
USB Keyboard FN1 Substitution Disable 7-14
Function Key Mapping Disable 7-15
Simulated Caps Lock Disable 7-15
Convert Case None 7-16
USB Static CDC Enable 7-16
CDC Beep on <BEL> Enable 7-17
TGCS (IBM) USB Direct I/O Beep Honor 7-17
TGCS (IBM) USB Beep Directive Ignore 7-18
TGCS (IBM) USB Bar Code Configuration Directive Ignore 7-18
TGCS (IBM) USB Specification Version Version 2.2 7-19
Table 7-1 USB Interface Parameter Defaults (Continued)
Parameter Default
Page
Number

Zebra DS2278 Specifications

General

Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	White
LED indicators	Yes
Built-in display	No
Housing material	-
International Protection (IP) code	IP42
Type	Handheld bar code reader
Wavelength	645 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	-65 - 65 °
Motion tolerance (cm/s)	13
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, Interleaved 2 of 5, Plessey, U.P.C.
Optical sensor resolution (W x H)	640 x 480 pixels
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
Battery life	84 h
Input voltage	4.5 - 5.5 V
Battery capacity	2400 mAh
Power source type	Battery, DC
Number of batteries supported	1
USB version	2.0
Bluetooth version	4.0
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	90 mm
Width	66 mm
Height	175 mm
Weight	214 g