User Preferences & Miscellaneous Options 4 - 3
Battery Preservation Mode 1765 F8h 06h E5h Enable 4-15
Trigger Mode (or Hand-Held Trigger Mode) 138 8Ah Standard (Level) 4-16
Hands-Free Mode 630 F1h 76h Enable 4-17
Hand-Held Decode Aiming Pattern 306 F0h 32h Enable 4-18
Hands-Free (Presentation) Decode Aiming
Pattern
590 F1h 4Eh Enable Hands-Free
(Presentation) Decode
Aiming Pattern on PDF
4-19
Picklist Mode 402 F0h 92h Disable Picklist Mode
Always
4-20
Continuous Bar Code Read 649 F1h 89h Disable 4-21
Unique Bar Code Reporting 723 F1h D3h Enable 4-21
Decode Session Timeout 136 88h 9.9 Seconds 4-22
Hands-Free Decode Session Timeout 400 F0 90 15 4-22
Timeout Between Decodes, Same Symbol 137 89h 0.5 Seconds 4-23
Timeout Between Decodes, Different
Symbols
144 90h 0.1 Seconds 4-23
Decode Mirror Images (Data Matrix Only) 537 F1h 19h Auto 4-24
Mobile Phone/Display Mode N/A N/A N/A 4-24
PDF Prioritization 719 F1h CFh Disable 4-25
PDF Prioritization Timeout 720 F1h D0h 200 ms 4-25
Decoding Illumination 298 F0h 2Ah Enable 4-26
Illumination Brightness 669 F1h 9Dh High 4-26
Low Light Scene Detection 810 F2h 2Ah Dim Illumination Low
Light Assist Scene
Detection
4-27
Motion Tolerance (Hand-Held Trigger Mode
Only)
858 F2h 5Ah Less 4-28
Product ID (PID) Type 1281 F8h 05h 01h Host Type Unique 4-29
Product ID (PID) Value 1725 F8h 06h BDh 0 4-29
ECLevel 1710 F8h 06h AEh 0 4-30
Table 4-1 User Preferences Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
