ZF Marine ClearCommand User Manual

Page 5
1.16 SYMPTOM - A slow repetitive tone is heard from all Stations when power is applied to the system. When the transfer
button is depressed, the tone ceases but the red LED does not light. Further depressing of the transfer button has no effect.
The transmission and engine remain at the Neutral/Idle position regardless of the Control Head lever position.. . . . . 8
1.17 SYMPTOM - Set-up Mode is entered and the normal 3 second steady tone is heard. The motor control relay “clicks”
continuously when the Dip Switches are turned On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.18 SYMPTOM - The motor relay does not click once, indicating values have been stored, when PB1 on the Auxiliary
Circuit is depressed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.0 RESET ALL PARAMETERS TO FACTORY DEFAULT VALUES - - - - - - - - - - - - - - - - 10
Figure 1: Dip Switch Setting Reset All Parameters to Factory Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Appendix C.1
Drawing 11202F-1 ....................................................................................................................................................... 3
Drawing 11202F-2 ....................................................................................................................................................... 5
Drawing 11202F-3 Notes Page ................................................................................................................................... 7

ZF Marine ClearCommand Specifications

General

Brand	ZF Marine
Model	ClearCommand
Category	Controller
Language	English