After each use, remove and dispose of any used cover/sheath. Wipe off any excess gel from
the transducer and clean it properly.
Air dry the z.one
pro
system.
WARNING: To avoid electrical shock before cleaning the z.one
pro
system, turn off the AC
circuit breaker at the rear of the system. Always use protective eyewear and clothing when
cleaning or disinfecting the z.one
pro
system.
The level of disinfection required for the z.one
pro
system is dictated by the type of
contaminants the system came in contact with.
If using a premixed disinfection solution, check the solution expiration date to ensure that
the solution has not expired. Do not used expired solutions.
To Next Page
