ZONARE Z.ONE PRO - Page 72

z.one
pro
Service Manual
Page 72 of 217
DICOM Configuration
Parameters:
Definition:
automatically or started manually.
Reconciliation
For exams NOT YET sent to PACS. Specifies that the system will interrogate the
patient information from the last stored image, prior to sending that exam to
DICOM PACS device. For images in that exam having differing information, the
system will reconcile (correct) those values in the DICOM headers prior to
sending.
Release Association
Specifies whether to release the DICOM association (communications link
between the z.one
pro
and the DICOM storage device) after each individual image
is transferred or maintain it until the entire exam is completed.
Remove Attributes
Specifies any DICOM attributes (i.e. Soft Tissue Thermal Index) that are desired to
be removed from the DICOM image header transferred with stored images. This
function is provided to allow compatibility with all DICOM target devices.
Scheduled Station AE Title
Identity (Application Entity Title) assigned to the ZONARE ultrasound system,
for use in filtering patient exam scheduling data provided by the Worklist server.
Value to be provided by PACs Admin, to meet department requirements.
SR Emulation - (special license req.)
Special feature (license file option required) for forced populating three fields in
DICOM header for SR output to enable acceptance by Siemens “SYNGO” PACS
- (0018,1020) Software Version(s) -- PMS5.1 Ultrasound iU22_4.0.1.1
- (0020,000E) Series Instance UID -- 1.2.840.113663.1500.1.xxx
- (0008,0018) SOP Instance UID -- 1.2.840.113663.1500.1.xxx
SR Private Data
Include raw serial calc data as DICOM “Private Element” content, with SR data
exported
Station Name
The user-friendly Host name that will be assigned to the system for
identification on the local network. Should be provided by the Network
Administrator.
Subnet Mask
The number of bits (within the 24-bit IP Address) that will be used for defining
the “Network” portion vs. the “Host” portion of the TCP/IP address.
TCP Timeout (sec)
The maximum duration (in seconds) of waiting time that will be allowed for
completion of transfers over the network. Set according to anticipated network
type/ speed.