ZyXEL Communications IES-1248-51 - Page 273

IES-1248-51/51A/53 User’s Guide
Chapter 44 Commands 273
User server <ip> <port>
<secret>
[high|middle|low|d
eny]
Set remote authentication server
IP address and secret
H/H
adsl
show Displays the ADSL settings. L/L
enable <portlist> Turns on the specified ADSL
ports.
M/L
disable <portlist> Turns off the specified ADSL
ports.
M/L
profile show [profile] Displays profile contents. L/L
profile set <profile> <fast|
interleave [=<up
delay>,<down
delay>]> <up max
rate> <down max
rate> [<up target
margin> <up min
margin> <up max
margin> <up min
rate> <down target
margin> <down min
margin> <down max
margin> <down min
rate> <up down-
shift margin> <up
up-shift margin>
<down down-shift
margin> <down up-
shift margin>]
Creates an adsl line profile. H/H
profile delete <profile> Removes an ADSL profile. H/H
profile map <portlist>
<profile>
<glite|gdmt|t1413|
auto|adsl2|adsl2+>
IES-1248-51/51A: Assigns a
specific profile to a port(s) and sets
the port’s ADSL mode.
H/H
profile map <portlist>
<profile>
<gdmt|etsi|auto|ad
sl2|adsl2+>
IES-1248-53: Assigns a specific
profile to a port(s) and sets the
port’s ADSL mode.
H/H
name <portlist> <name> Sets the name of a port(s). M/L
tel <portlist> <tel> Records an ADSL port(s)
subscriber’s telephone number.
M/L
loopback <portlist> <f5>
<vpi> <vci>
Performs an OAMF5 loopback
test.
H/H
vcprofile show [vcprofile] Shows a virtual channel profile’s
contents.
L/L
vcprofile set <vcprofile>
<vc|llc> <ubr|cbr>
<pcr> <cdvt>
Creates a UBR or CBR virtual
channel profile (with
encapsulation).
H/H
Table 92 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P