Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 325
LLDP ENABLED
This field is used to activate the LLDP protocol in the terminal, (1 = yes) or no (0= no),
VLAN ID and VLAN PORT: These parameters are used to define the VLAN dedicated to
terminals 67xxi, A53xxip and i7xx). They are not obligatory on simple networks.
If the DHCP value 1, the screen is displayed.
Enter "y" to configure the integrated DHCP service.
SUBNET MASK: subnet mask dedicated to IP and SIP terminals
BEGIN RANGE and END RANGE: Address range dedicated to IP and SIP terminals
GATEWAY: gateway IP address of the network dedicated to IP and SIP terminals.
Aastra 5000 Configuration / SIP 67xxi
An existing configuration was found
*-------------------------------------------------*
| DEPLOYMENT XML SERVER : 1 |
| DEPLOYMENT PASSWORD : 2345 |
| LLDP ENABLED : 0 |
|
*-------------------------------------------------*
Do you confirm (Y/N)?
Aastra 5000 Configuration / DHCP
*-------------------------------------------------*
| SUBNET MASK :
| BEGIN RANGE : |
| END RANGE : |
| GATEWAY : |
| VLAN ID : |
| VLAN PORT : |
*-------------------------------------------------*
Invalid_IP_BEGINRANGE
To Next Page
Loading...
Need help?
General
