AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 324 01/2011 Installation and activation
FTP : value 0 or 1.
This field allows the use (1 = yes) or non-use (0= no) of the FTP service integrated into
Aastra X series terminals during a first installation. The FTP server must be enabled (1) in
order to then use the integrated DHCP and TMA services.
Default value in factory setting: FTP = 1
Note : This FTP field is not proposed for the Aastra 5000 server.
TMA: value 0 or 1.
This field allows the use (1 = yes) or non-use (0= no) of the TMA service integrated into
Aastra X series terminals. For management with AM7450, the integrated TMA service is
inactive since management is centralised for all the terminals on AM7450.
Default value in factory setting: TMA = 1
DHCP: value 0 or 1.
This field allows the use (1 = yes) or non-use (0= no) of the DHCP service integrated into
Aastra X series terminals.
If an external DHCP server is used, the integrated DHCP service is inactive.
If the DHCP value is 0, then VLANID and VLANPORT are proposed.
DEPLOYMENT XML SERVER
This field is used to activate (1 = yes) or deactivate (0= no) access to the XML server used
to open a deployment session.
DEPLOYMENT PASSWORD
This password is optional and is used to open a session during deployment with the XML
server for activating the DEPLOYMENT XML SERVER parameter. The default value is
2345, but can be modified. This value can also be displayed and modified in the AMP
menu Subscribers/67xxi terminals parameters/Parameters.
Aastra 5000 Configuration / SIP 67xxi
An existing configuration was found
*-------------------------------------------------*
| DEPLOYMENT XML SERVER : 1 |
| DEPLOYMENT PASSWORD : 2345 |
| LLDP ENABLED : 0 |
| VLAN ID : |
| VLAN PORT : |
*-------------------------------------------------*
Do you want to change configuration Y(es)/N(o) ? N
To Next Page
Loading...
Need help?
General
