AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 344 01/2011 Installation and activation
The "SUBSCRIBER" field is used to assign a subscription number as day and reduced
number to call distribution 0. This number is assigned if it corresponds to an internal
subscription which can be added to a call distribution service, or if it corresponds to the
number of a subscription that may be on the multi-site network (A5000 Server).
The "
DID" field is used to assign a DID number to call distribution service0. Authorised
characters are " 0123456789ABCDE".
• After the last line is validated, a summary of the network parameters is displayed for
confirmation.
• If the values are correct, press "Return" to confirm, after pressing "
y".
The next screen is used to configure the numbering plan length.
•Press "Return" to confirm, after entering "
y" or "n".
If the answer is "
y", enter the corresponding values.
The field is used to define the internal number length to take into account (2 to 6). This
field is associated with the fields first, last, modem, IVB, hscx, common subscriber
and common bell defined on the "Subscribers" screen.
•Press "Return" to confirm, after entering "
y".
AASTRA 5000 CONFIGURATION / NL
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE NUMBERING LENGTH: Y |
*-------------------------------------------------*
AASTRA 5000 CONFIGURATION / NL
*-------------------------------------------------*
| NUMBERING LENGTH: 4 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ? Y
To Next Page
Loading...
Need help?
General
