Aastra AXD User Manual

Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 343
After this series of screens concerning TMA, FTP and DHCP services, the system's
general parameters declaration screen opens (name, IID (system identification number)):
• If you answer YES, "
y", the next screen allows you to declare the system’s general
parameters.
• Fill in successively the different fields, using the Return key to change line.
• After the last line is validated, a summary of the network parameters is displayed for
confirmation.
• If the values are correct, press "Return" to confirm, after pressing "
y".
The next screen is used to configure call distribution.
•Press "Return" to confirm, after entering "
y" or "n".
If the answer is "
y", fill in successively the different fields, by pressing Return to change
line.
AASTRA 5000 CONFIGURATION / SIP SERVICE
AN EXISTING CONFIGURATION WAS FOUND
*-------------------------------------------------*
| FTP : 1
| TMA : 1 |
| DHCP : 0 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ?
AASTRA 5000 CONFIGURATION / Name&IID
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE NAME/IID (Y/N): Y |
AASTRA 5000 CONFIGURATION / Name&IID
*-------------------------------------------------*
| NAME: A5000 |
| IID: 00130927001 |
*-------------------------------------------------*
AASTRA 5000 CONFIGURATION / Call Dist
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE CALL DISTRIBUTION: Y |
*-------------------------------------------------*

Aastra AXD Specifications

General

Brand	Aastra
Model	AXD
Category	Server
Language	English